Rockwell Tools 1783-MS10T User Manual download pdf (Page 35)

Publication 1783-UM002C-EN-P - April 2009 35

Chapter 2

Install the Switch on a Wall or Panel

The switch can be installed on a wall or a panel. To attach the switch to a wall

or a panel, follow these steps.

1. If the DIN rail latches are pushed out, push them in so they are fully

locked in place.

2. Rotate all feet to their recessed positions so that the switch can mount

flat on the wall or panel.

IMPORTANT

If you are installing expansion modules, attach the expansion

modules to the switch before mounting the switch.

TIP

You will need M5 or #10-24 or #10-32 bolts or screws with 1.27

cm (0.5 in.) O.D. flat washers. This hardware is not provided

with the switch.

31777-M

TIP

If greater air circulation around the switch is required, rotate

the feet to their extended positions before mounting the switch

on the wall.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 91 92

No comments

Rockwell Tools 1783-MS10T User Manual Page 35