Rockwell Tools 1783-MS10T User Manual download pdf (Page 49)

Publication 1783-UM002C-EN-P - April 2009 49

Chapter 2

If the switch fails POST, the EIP Mod status indicator turns red.

4. Press and release the Express Setup button. Wait for a few seconds until

the status indicator on one of the unconnected switch ports flashes

green.

This button is recessed 16 mm (0.63 in.) behind the front panel. Use a

small tool, such as a paper clip, to reach the button.

5. Connect a Category 5 Ethernet cable (not provided) from the flashing

switch port to the Ethernet port on your personal computer.

The port status indicators on your personal computer and on the switch

both flash while the switch configures the connection.

TIP

If you wait too long to connect the cable, the Setup status

indicator turns off. Go back to step 4 on page 49.

VRTA A

31793-M

EIP Mod Status Indicator

Setup Status Indicator

VRTAA

31793-M

Express Setup

Button

VRTA A

31794-M

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 91 92

No comments

Rockwell Tools 1783-MS10T User Manual Page 49