Rockwell Tools 1783-MS10T User Manual download pdf (Page 61)

Publication 1783-UM002C-EN-P - April 2009 61

Chapter 2

Connect to 100BaseFX Ports

1. Insert a fiber optic cable with an LC connector into the 100BASE-FX

port of the 1783-MX08F expansion module.

2. Insert the other cable end into the other device.

Verify Port Connectivity

After you connect to the switch port and another device, the port status

indicator turns amber while the switch establishes a link. This process takes

about 30 seconds, and then the status indicator turns green when the switch

and the target device have an established link.

If the status indicator is off, the target device might not be turned on, there

might be a cable problem, or there might be a problem with the adapter

installed in the target device.

ATTENTION

Class 1 laser product. Laser radiation is present when the

system is open and interlocks bypassed. Only trained and

qualified personnel should be allowed to install, replace, or

service this equipment.

31797-M

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 91 92

No comments

Rockwell Tools 1783-MS10T User Manual Page 61