Rockwell Tools 1783-MS10T User Manual download pdf (Page 33)

Publication 1783-UM002C-EN-P - April 2009 33

Chapter 2

1. Insert a sharp tool such as a screwdriver in the space next to the tab,

push gently to release the catch, then turn the screwdriver to push the

tab out.

2. If you are using a heavy-duty 35 mm x 15 mm (1.38 in. x 0.59 in.) DIN

rail, rotate all feet to the extended positions.

Otherwise, if you are using 35 mm x 7.5 mm (1.38 in. x 0.30 in.) DIN rail,

rotate the feet to the recessed positions.

3. Position the rear panel of the switch directly in front of the DIN rail,

making sure that the DIN rail fits in the space between the two latches.

31776-M

31777-M

Latch

Foot

31778-M

Latch

DIN Rail

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 91 92

Stratix 8000 Ethernet 1
Managed Switches 1
Important User Information 2
About This Publication 3
Who Should Use This 3
Publication 3
Additional Resources 4
Table of Contents 5
Chapter 3 6
Troubleshoot the Switch 6
Chapter 4 6
Cable and Connectors 6
About the Switches 8
Chapter 1 9
(side cover removed) 10
Power and Relay Connector 11
Console Port 12
Dual-Purpose Uplink Ports 12
10/100 Ports 13
100BASE-FX Ports 13
Rear Panel 13
Auto-MDIX Feature 14
Status Indicators 15
Chapter 1 16
Status Indicator 17
SFP Module Port 17
RJ45 Port 17
CompactFlash Memory 19
Install the Switch 21
Chapter 2 22
Chapter 2 23
ATTENTION 23
Installation Guidelines 24
Before You Begin 24
Place the Switch 25
Verify Package Contents 26
Add Modules to the Switch 26
IMPORTANT 30
Mount the Switch 32
Ground the Switch 38
Wire the DC Power Source 40
Install or Remove the 47
CompactFlash Card 47
Set Up the Switch Initially 48
Configure and Manage the 53
Use RSLogix 5000 Software 54
Reset the Switch to Factory 58
Defaults 58
Connect to the Switch Ports 58
Connect to 10/100/1000 Ports 59
Connect to SFP Fiber Ports 60
Verify Port Connectivity 61
Verify Switch Operation 62
Connect a Computer or a 62
Terminal to the Console 62
Run a Power-on Self-test 63
Verify POST Results 63
Disconnect Power 64
Install and Remove SFP 64
Bale Clasp Latch 66
Connect to SFP Modules 67
Verify Switch Status 70
Indicators 70
Verify Switch Connections 70
Ethernet and Fiber Cables 71
Link Status 72
Transceiver Issues 72
Verify Switch Performance 73
Obtain Configuration 74
Information 74
SFP Module Ports 78
Dual-purpose Ports 79
Cable and Adapter 80
Specifications 80
Adapter Pinouts 80
Chapter 4 81
How Are We Doing? 83
BUSINESS REPLY MAIL 84
Rockwell Automation 92

Comments to this Manuals

No comments

Rockwell Tools 1783-MS10T User Manual Page 33

Comments to this Manuals